Ringkesan

Parts of a Plane

This image shows two types of planes (woodworking tools) and labels some of the parts.

A: The mouth is an opening in the bottom of the plane down through which the blade extends, and up through which wood shavings pass.

B: The iron is a plate of steel with a sharpened edge which cuts the wood. Some people refer to it as the blade.

C: The lever cap holds the blade down firmly to the body of the plane.

D: The depth adjustment knob controls how far the blade extends through the mouth.

E: The knob is a handle on the front of the plane.

F: The chipbreaker or Cap iron serves to make the blade more rigid and to curl and break apart wood shavings as they pass through the mouth.

G: The lateral adjustment lever is used to adjust the iron by skewing it so that the depth of cut is uniform across the mouth.

H: The tote is a handle on the rear of the plane.(Some aficionados object to the use of the word tote preferring handle).

I: The finger rest knob Block planes are held in the palm of the hand while the tip of the user's index finger rests in the indentation on top of the knob. On some planes the knob is used to adjust the size of the mouth by allowing a sliding portion of the sole to be moved back or forward to accomplish this.

J: The frog is a sliding iron wedge that holds the plane iron at the proper angle. It slides to adjust the gap between the cutting edge and the front of the mouth. The frog is screwed down to the inside of the sole through two parallel slots and on many planes is only adjustable with a screwdriver when the plane iron is removed. Some planes, such as the Stanley Bedrock line and the bench planes made by Lie-Nielsen and WoodRiver/WoodCraft have a screw mechanism that allows the frog to be adjusted without removing the blade.

There is also an unlabeled image for translation purposes.

The image was created by User:etune. on http://en.wikipedia.org/wiki/Image:Plane_parts.jpg

Lisènsi

	Barkas iki kalilakaké sangisoring palilah Creative Commons Atribusi-Andum Mèmper 3.0 Tanpa Adhaptasi. Subject to disclaimers.
	Kowé kena: ngedum – nyalin, nyebar, lan ngirim karya nyampur – ngolah karya Sangisoré kahanan mangkéné: atribusi – Kowé kudu mènèhi krédhit kang patut, mènèhi pranala lisènsi, lan kandha yèn ana owah-owahan. Kowé bisa tumindak sasenengmu, nanging ora teges kang duwé lisènsi njurung lakumu. andum mèmper – Manawa kowé nyalin rupa, ngowahi, utawa nggawé karya nganggo bahan karya iki, kowé kudu mbabar karyamu kang wis dadi nganggo lisènsi kang padha utawa kang cocog karo karya asliné..
	Tag lisènsi iki ditambahaké nèng berkas iki minangka bagéyané panganyaran lisènsi GFDL.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue

Idih kawènèhaké saprelu nyalin, ngedum, lan/utawa ngowah layang iki manut bebaku Palilah Pilayang Bébas GNU, Angka 1.2 utawa angka luwih anyar sing dibabar Yeyasan Piranti Alus Bébas; tanpa Pérangan Invarian, tanpa Tulisan Samak Arep, lan tanpa Tulisan Samak Buri. Salinan palilah dirembug ing pérangan asesirah Palilah Pilayang Bébas GNU. Subject to disclaimers.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue